Natural gas and biogas industry

Compact analyzer of natural gas parameters

Portable and stationary analyzers to monitor Wobbe index, calorific value, compressibility, methane number, CO2, but also H2 content of natural gas.

Monitoring of natural gas odorization

The analyzers use chromatographic separation of individual odorizing components and a sensitive electrochemical detector. Due to the chromatographic principle, the enrichment of the gas with hydrogen does not affect the measurement. The system is virtually maintenance-free, requiring only a quarterly addition of distilled water to the detector. The life expectancy of the detector is over 10 years. The device uses nitrogen as a new gas, either from a pressure bottle or from an optional generator, which is part of the device.

Gas samplers

The samplers are designed for mounting on pipelines and providing a representative sample for subsequent laboratory analysis in suitable pressure vessels. Sampling can be proportional to time or to the amount of gas flow.

Analysis of total sulfur

These are devices based on the acetate tape principle with a TS hydrogen reactor. The instruments can be supplied with a built-in hydrogen generator. There is a possibility of simultaneous measurement of H2S and TS. The advantage is the monitoring of any sulfur compounds with a large dynamic range of sensitivity.

Transport sampling cylinders

Pressure cylinders for safe transport of gas samples.

Odorant injection systems

The odorant injection systems use a pneumatic or electric pump. They can be equipped with a solid container for odorants. The modular system covers a wide range of dispensers from 1.5 liters of odorant per day to large volumes of hundreds of liters. There is also a “zero emissions” injection systems that can be installed without any restrictions on the impact on the environment.

Monitoring of H2S, CO2, O2 and humidity

TDL-based device used mainly for monitoring H2S, CO2, O2 and humidity in natural gas. It is characterized by robustness and high operational reliability.

Analysis of hydrogen in natural gas

H2SCAN instruments use a unique palladium-nickel measuring cell technology that selectively measures the hydrogen content in the monitored medium. It does not require any additional infrastructure, additional measurements, or auxiliary media.

Clamp-on gas flow monitors

Clamp-on ultrasonic flow monitors allow flexible monitoring of gas pipes. The instruments can be used also as portative devices to monitor not only flow, but also heat transfer.

Camera system for deposit detection

Camera system for the detection of liquid and solid deposits at the bottom of gas pipelines.